|Appears in Collections:||Biological and Environmental Sciences Journal Articles|
|Peer Review Status:||Refereed|
|Title:||Thermal and microstructural properties of fine-grained material at the Viking Lander 1 site|
|Authors:||Paton, Mark D|
|Citation:||Paton MD, Harri A, Savijarvi H, Makinen T, Hagermann A, Kemppinen O & Johnston A (2016) Thermal and microstructural properties of fine-grained material at the Viking Lander 1 site, Icarus, 271, pp. 360-374.|
|Abstract:||As Viking Lander 1 touched down on Mars one of its footpads fully penetrated a patch of loose fine-grained drift material. The surrounding landing site, as observed by VL-1, was found to exhibit a complex terrain consisting of a crusted surface with an assortment of rocks, large dune-like drifts and smaller patches of drift material. We use a temperature sensor attached to the buried footpad and covered in fine-grained material to determine the thermal properties of drift material at the VL-1 site. The thermal properties are used to investigate the microstructure of the drift material and understand its relevance to surface-atmosphere interactions. We obtained a thermal inertia value of 103 ± 22 tiu. This value is in the upper range of previous thermal inertia estimates of martian dust as measured from orbit and is significantly lower than the regional thermal inertia of the VL-1 site, of around 283 tiu, obtained from orbit. We estimate a thermal inertia of around 263 ± 29 tiu for the duricrust at the VL-1 site. It was noted the patch of fine-grained regolith around the footpad was about 20-30 K warmer compared to similar material beyond the thermal influence of the lander. An effective diameter of 8 ± 5 μm was calculated for the particles in the drift material. This is larger than atmospheric dust and large compared to previous estimates of the drift material particle diameter. We interpret our results as the presence of a range of particle sizes, <8 μm, in the drift material with the thermal properties being controlled by a small amount of large particles (~8 μm) and its cohesion being controlled by a large amount of smaller particles. The bulk of the particles in the drift material are therefore likely comparable in size to that of atmospheric dust. The possibility of larger particles being locked into a fine-grained material has implications for understanding the mobilisation of wind blown materials on Mars. © 2016 Elsevier Inc.|
|Rights:||The publisher does not allow this work to be made publicly available in this Repository. Please use the Request a Copy feature at the foot of the Repository record to request a copy directly from the author. You can only request a copy if you wish to use this work for your own research or private study.|
|1-s2.0-S0019103516000786-main.pdf||3.24 MB||Adobe PDF||Under Embargo until 31/12/2999 Request a copy|
Note: If any of the files in this item are currently embargoed, you can request a copy directly from the author by clicking the padlock icon above. However, this facility is dependent on the depositor still being contactable at their original email address.
This item is protected by original copyright
Items in the Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
If you believe that any material held in STORRE infringes copyright, please contact firstname.lastname@example.org providing details and we will remove the Work from public display in STORRE and investigate your claim.